In my turtle3d program, there are two modes; in the default mode, the turtle makes one forward step, drawing a tube, or, if there is a contour in effect, it does a custom extrusion with two points. In the other mode, it collects points defined by the moves and then extrudes a single custom mesh, wh…

Ok, I have, after a long and winding spiral into TS, a working fix that I think somebody, not me, should incorporate. Supplying an initial normal fixes the problems with extrusions. At the bottom of the new playground is a JS hack of shapebuilder.ts that solves the problem. Babylon.js Play…

Ok, I had a thought (#4) that an extrusion with two path points was a funky boundary case, so in the last test, I insert a midpoint, and voila’, the problem goes away. Maybe this should be in the docs, if isn’t easy to fix. New playground with tests: Babylon.js Playground Babylon.js pla…

@PirateJC the doc keeper might help on adding this to the doc. @lowclouds would you be willing to create a PR ?

Good thinking. Obviously, with just two points it cannot interpolate correctly. Might be worse a couple of lines of text in the doc and a PG?

It turns out there was a bug in my test program: the problem does not go away no matter how many points are inserted between the endpoints. After looking at the Babylon source (and not completely understanding it), I think the problem has to do with computing normals and tangents on straight segment…

[image] lowclouds: tangents I believe this part to be important in the final result. I still think that 2 points might just not be enough to get the exact ‘curvature’. Hope you’ll get it right and next will be able to feed us with your input on this. :smiley:

In the last set, I use 3 points for third and fourth segments. It works for the third segment but not for the fourth one.

FWIW, I’m rewriting the two point path segments to use ribbons, since the turtle always keeps track of its orientation and heading. That said, an optional input to the extrusion routines of the tangent, normal, and binormal vectors for the initial point could rescue them for straight paths.

[image] lowclouds: ribbons Yes, a good idea. Hard to master but can give great results.

The fix is even easier than I thought, since Path3D takes an optional normal vector as its second parameter. Supplying an optional normal vector in the extrudeShape calls could be used in the Path3D constructor on line 316 in shapeBuilder.ts.

Need help getting piecewise extrusion to look like longer extrusion

Questions

lowclouds May 2, 2022, 4:17pm 5

creating a PR would be another first; it might take a while

ExtrudeShape does not seem to follow the path i give it

Topic		Replies	Views
Generate a flat path that follows the terrain with a spline Questions	28	369	March 9, 2024
Issue on extruding shape Bugs extrudeshape	5	664	September 24, 2022
ClosedPath enhancement/fix for ExtrudeShape* Feature requests	17	577	November 6, 2023
ExtrudeShape does not seem to follow the path i give it Bugs	6	1026	June 10, 2022
BABYLON.MeshBuilder.ExtrudeShape has weird lines Questions	2	177	March 18, 2024

Need help getting piecewise extrusion to look like longer extrusion

Related topics